Products

Picard 252/19 1/2 Pry and Bumping Spoon The Picard 252/19 1/2 is a long pry and bumping spoon, 390 mm overall, with a 200 mm working blade that tap...

Picard 252/22 K Planishing Hammer - Checked Face The Picard 252/22 K is a planishing hammer with a 32 mm checked round face and a 25 mm smooth squa...

Picard 252/22 Planishing Hammer - Smooth Faces The Picard 252/22 is a general purpose planishing hammer with a 32 mm round face and a 25 mm square ...

Picard 252/23 K Planishing Hammer - Checked Face, Short Pattern The Picard 252/23 K is a short pattern planishing hammer with a 40 mm checked round...

Picard 252/25 Bumping Hammer - Cross Pein The Picard 252/25 is a light bumping hammer with a 30 mm round face and a 25 x 5 mm cross pein. It weighs...

Picard 252/26 Pick Hammer - Flat Pein The Picard 252/26 is a pick hammer with a 40 mm round face and a long, flat 20 x 3 mm pein. It weighs 450 g (...

Picard 252/27 1/2 Pick Hammer - Short Pattern The Picard 252/27 1/2 is a short pattern pick hammer with a 37 mm round face and a fine pointed pick....

Picard 252/28 1/2 Pick Hammer - Special Pattern The Picard 252/28 1/2 is a pick hammer with a 40 mm round face and a long pick tapered to a fine po...

Picard 252/28 Ball End Hammer The Picard 252/28 is a body hammer with a 40 mm round face and an 18 mm ball end on a long pein. It weighs 460 g (16 ...

Picard 252/29 Balanced Ding Hammer The Picard 252/29 is a balanced ding hammer with two smooth round faces, 30 mm and 40 mm. It weighs 430 g (15 oz...

The Picard 252/35 "Diablo Pattern" Hand Dolly is a versatile dolly to have in your line-up - with a domed surface on 1 side incorporating a rounded...

Picard 252/36 Sole Pattern Dolly The Picard 252/36 is a sole pattern dolly, 105 x 66 mm, shaped like the sole of a shoe. It weighs 950 g (2.09 lb)....

Picard 252/40 Toe Dolly / Anvil Block The Picard 252/40 is a low profile toe dolly, 120 mm long, with flat and curved working faces. It weighs 760 ...

Picard 252/40S Toe Dolly / Anvil Block The Picard 252/40 S is the heavy duty version of the 252/40 toe dolly, thicker and about 50 percent heavier....

Picard 252/41 1/2 Fender Utility Dolly The Picard 252/41 1/2 is a compact utility dolly for fender work, 80 mm long, with crowned working faces of ...

Picard 252/44 Hatchet Dolly The Picard 252/44 is a hatchet pattern dolly, 192 mm long, with a long blade style working edge. It weighs 1600 g (3.53...

Picard 252/47 Bumping Hammer with Rubber Cap The Picard 252/47 is a bumping hammer with a 33 mm steel face at one end and a changeable 55 mm rubber...

Picard 252/47 Replacement Rubber Cap - 55 mm This is the replacement 55 mm rubber cap for the Picard 252/47 bumping hammer. The cap is the wearing ...

Picard 252/48 K Planishing Hammer - Checked Face The Picard 252/48 K is a large face planishing hammer with a 46 mm checked round face and a 40 mm ...

Picard 252/48 Planishing Hammer - Smooth Faces The Picard 252/48 is a large face planishing hammer with a 46 mm smooth round face and a 40 mm smoot...

Picard 252/51 Cross Pein Finishing Hammer - Curved Pein The Picard 252/51 is a light finishing hammer with a large, thin round face and a curved cr...

Picard 252/52 Cross Pein Finishing Hammer - Straight Pein The Picard 252/52 is a light finishing hammer with an extra wide, thin round face and a s...

Picard 252/54 1/2 Single Face Planishing Hammer - Arched Face The Picard 252/54 1/2 is a single face planishing hammer with a 47 x 29 mm face that ...

Picard 252/54 Single Face Planishing Hammer - Flat Face The Picard 252/54 is a single face planishing hammer with a flat, smooth 47 x 29 mm rectang...