All Products

Picard 252/40 Toe Dolly / Anvil Block The Picard 252/40 is a low profile toe dolly, 120 mm long, with flat and curved working faces. It weighs 760 ...

The Picard 252/35 "Diablo Pattern" Hand Dolly is a versatile dolly to have in your line-up - with a domed surface on 1 side incorporating a rounded...

Picard 252/12 Heel Dolly The Picard 252/12 is a shouldered heel dolly, 80 x 60 mm. It weighs 1050 g (2.31 lb). The shouldered shape gives a flat fa...

Picard 252/11 General Purpose Dolly / Anvil Block The Picard 252/11 is a general purpose dolly with two large working faces of different crown. It ...

Picard 252/22 Planishing Hammer - Smooth Faces The Picard 252/22 is a general purpose planishing hammer with a 32 mm round face and a 25 mm square ...

Picard 252/17 Mercedes Pattern Dolly / Anvil Block The Picard 252/17 is the 'Mercedes' pattern dolly, with flat faces, curved faces and sharp edges...

Picard No. 249 Body Hammer and Dolly Set - 7 Piece The Picard No. 249 is Picard's starter body kit: three hammers, a soft face hammer and three dol...

Picard 252/40S Toe Dolly / Anvil Block The Picard 252/40 S is the heavy duty version of the 252/40 toe dolly, thicker and about 50 percent heavier....

Move Metal With Ease with the 2.2lb Picard No. 174 Embossing Hammer With it's alloyed PICARD special - steel which has been hardened, tempered, gro...

Picard No. 260 Body Tool Set - 23 Piece The Picard No. 260 is a 23 piece professional body tool set in sheet steel cases: hammers, dollies, spoons,...

Picard No. 254 Body Tool Set - 27 Piece The Picard No. 254 is a 27 piece body tool set in sheet steel cases, covering hammers, dollies, spoons, a p...

Picard 252/47 Replacement Rubber Cap - 55 mm This is the replacement 55 mm rubber cap for the Picard 252/47 bumping hammer. The cap is the wearing ...

Picard No. 259 Body Hammer, Dolly and Spoon Set - 12 Piece The Picard No. 259 is a 12 piece body repair set in a sheet steel case: four hammers, fo...

Picard 251/9a Body File Blade - Bright, 355 mm The Picard 251/9a is a 355 mm milled curved tooth file blade in Picard's bright finish, for the Pica...

Picard 252/36 Sole Pattern Dolly The Picard 252/36 is a sole pattern dolly, 105 x 66 mm, shaped like the sole of a shoe. It weighs 950 g (2.09 lb)....

Picard 251/9 1/2 Body File Holder with Rough File Blade The Picard 251/9 1/2 is a 355 mm light alloy body file holder, supplied with a rough milled...

Picard 251/9 1/2 Body File Holder - No Blade The Picard 251/9 1/2 is the 355 mm light alloy body file holder on its own, without a blade. It weighs...

Picard 252/15 Roof Wedge Dolly / Anvil Block The Picard 252/15 is a comma shaped roof wedge dolly, 130 x 55 mm, with a long tapered working edge. I...

Picard 252/16 Wedge Dolly / Anvil Block The Picard 252/16 is a wedge shaped dolly, 112 x 64 mm, tapering to a thin edge. It weighs 940 g (2.07 lb)....

Picard 252/16 1/2 Fender Utility Dolly The Picard 252/16 1/2 is a long, low fender utility dolly, 127 x 61 mm and 27 mm high. It weighs 1330 g (2.9...

Picard 252/13 Fender Utility Dolly The Picard 252/13 is a utility dolly for fender work, with a waisted body and differently crowned working faces....

Picard 252/58 Curved Fender Dolly The Picard 252/58 is a curved fender dolly, 110 x 62 mm, shaped to work the inside of wheel arch lips and rolled ...

Picard 252/44 Hatchet Dolly The Picard 252/44 is a hatchet pattern dolly, 192 mm long, with a long blade style working edge. It weighs 1600 g (3.53...

Picard 252/41 1/2 Fender Utility Dolly The Picard 252/41 1/2 is a compact utility dolly for fender work, 80 mm long, with crowned working faces of ...

Picard 252/55 Special Pattern Dolly / Anvil Block The Picard 252/55 is a special pattern dolly, 102 x 55 mm, with a curved hook profile. It weighs ...

Picard 252/18 Inside Pry and Surfacing Spoon - Short The Picard 252/18 is a short pattern pry and surfacing spoon with a working head that tapers f...

Picard 252/19 1/2 Pry and Bumping Spoon The Picard 252/19 1/2 is a long pry and bumping spoon, 390 mm overall, with a 200 mm working blade that tap...

Picard 252/59 Low Profile Fender Dolly The Picard 252/59 is a thin, low profile dolly, 105 x 68 mm and only 19 mm high, made for fender work. It we...

Picard 252/18 1/2 Inside Pry and Surfacing Spoon - Long The Picard 252/18 1/2 is a long pattern pry and surfacing spoon with a 50 mm wide, 160 mm l...

Picard 252/23 K Planishing Hammer - Checked Face, Short Pattern The Picard 252/23 K is a short pattern planishing hammer with a 40 mm checked round...

Picard 252/22 K Planishing Hammer - Checked Face The Picard 252/22 K is a planishing hammer with a 32 mm checked round face and a 25 mm smooth squa...

Picard 252/48 K Planishing Hammer - Checked Face The Picard 252/48 K is a large face planishing hammer with a 46 mm checked round face and a 40 mm ...

Picard 251/6 1/2 Double Face Planishing Hammer The Picard 251/6 1/2 is a compact double face planishing hammer with a 30 mm round face and a 25 mm ...

Picard 252/48 Planishing Hammer - Smooth Faces The Picard 252/48 is a large face planishing hammer with a 46 mm smooth round face and a 40 mm smoot...

Picard 251/4 Double Face Bumping Hammer The Picard 251/4 is a double face bumping hammer with a 33 mm round face and a narrow 36 x 10 mm rectangula...

Picard 252/28 Ball End Hammer The Picard 252/28 is a body hammer with a 40 mm round face and an 18 mm ball end on a long pein. It weighs 460 g (16 ...