picard

Picard 251/4 Double Face Bumping Hammer The Picard 251/4 is a double face bumping hammer with a 33 mm round face and a narrow 36 x 10 mm rectangula...

Picard 251/6 1/2 Double Face Planishing Hammer The Picard 251/6 1/2 is a compact double face planishing hammer with a 30 mm round face and a 25 mm ...

Picard 251/9 1/2 Body File Holder - No Blade The Picard 251/9 1/2 is the 355 mm light alloy body file holder on its own, without a blade. It weighs...

Picard 251/9 1/2 Body File Holder with Rough File Blade The Picard 251/9 1/2 is a 355 mm light alloy body file holder, supplied with a rough milled...

Picard 251/9a Body File Blade - Bright, 355 mm The Picard 251/9a is a 355 mm milled curved tooth file blade in Picard's bright finish, for the Pica...

Picard 251/9a Body File Blade - Rough, 355 mm The Picard 251/9a is a 355 mm milled curved tooth file blade, rough cut, for the Picard 251/9 1/2 bod...

Picard 252/11 General Purpose Dolly / Anvil Block The Picard 252/11 is a general purpose dolly with two large working faces of different crown. It ...

Picard 252/12 Heel Dolly The Picard 252/12 is a shouldered heel dolly, 80 x 60 mm. It weighs 1050 g (2.31 lb). The shouldered shape gives a flat fa...

Picard 252/13 Fender Utility Dolly The Picard 252/13 is a utility dolly for fender work, with a waisted body and differently crowned working faces....

Picard 252/15 Roof Wedge Dolly / Anvil Block The Picard 252/15 is a comma shaped roof wedge dolly, 130 x 55 mm, with a long tapered working edge. I...

Picard 252/16 1/2 Fender Utility Dolly The Picard 252/16 1/2 is a long, low fender utility dolly, 127 x 61 mm and 27 mm high. It weighs 1330 g (2.9...

Picard 252/16 Wedge Dolly / Anvil Block The Picard 252/16 is a wedge shaped dolly, 112 x 64 mm, tapering to a thin edge. It weighs 940 g (2.07 lb)....

Picard 252/17 Mercedes Pattern Dolly / Anvil Block The Picard 252/17 is the 'Mercedes' pattern dolly, with flat faces, curved faces and sharp edges...

Picard 252/18 1/2 Inside Pry and Surfacing Spoon - Long The Picard 252/18 1/2 is a long pattern pry and surfacing spoon with a 50 mm wide, 160 mm l...

Picard 252/18 Inside Pry and Surfacing Spoon - Short The Picard 252/18 is a short pattern pry and surfacing spoon with a working head that tapers f...

Picard 252/19 1/2 Pry and Bumping Spoon The Picard 252/19 1/2 is a long pry and bumping spoon, 390 mm overall, with a 200 mm working blade that tap...

Picard 252/22 K Planishing Hammer - Checked Face The Picard 252/22 K is a planishing hammer with a 32 mm checked round face and a 25 mm smooth squa...

Picard 252/22 Planishing Hammer - Smooth Faces The Picard 252/22 is a general purpose planishing hammer with a 32 mm round face and a 25 mm square ...

Picard 252/23 K Planishing Hammer - Checked Face, Short Pattern The Picard 252/23 K is a short pattern planishing hammer with a 40 mm checked round...

Picard 252/25 Bumping Hammer - Cross Pein The Picard 252/25 is a light bumping hammer with a 30 mm round face and a 25 x 5 mm cross pein. It weighs...

Picard 252/26 Pick Hammer - Flat Pein The Picard 252/26 is a pick hammer with a 40 mm round face and a long, flat 20 x 3 mm pein. It weighs 450 g (...

Picard 252/27 1/2 Pick Hammer - Short Pattern The Picard 252/27 1/2 is a short pattern pick hammer with a 37 mm round face and a fine pointed pick....

Picard 252/28 1/2 Pick Hammer - Special Pattern The Picard 252/28 1/2 is a pick hammer with a 40 mm round face and a long pick tapered to a fine po...

Picard 252/28 Ball End Hammer The Picard 252/28 is a body hammer with a 40 mm round face and an 18 mm ball end on a long pein. It weighs 460 g (16 ...