Picard

Picard 252/29 Balanced Ding Hammer The Picard 252/29 is a balanced ding hammer with two smooth round faces, 30 mm and 40 mm. It weighs 430 g (15 oz...

The Picard 252/35 "Diablo Pattern" Hand Dolly is a versatile dolly to have in your line-up - with a domed surface on 1 side incorporating a rounded...

Picard 252/36 Sole Pattern Dolly The Picard 252/36 is a sole pattern dolly, 105 x 66 mm, shaped like the sole of a shoe. It weighs 950 g (2.09 lb)....

Picard 252/40 Toe Dolly / Anvil Block The Picard 252/40 is a low profile toe dolly, 120 mm long, with flat and curved working faces. It weighs 760 ...

Picard 252/40S Toe Dolly / Anvil Block The Picard 252/40 S is the heavy duty version of the 252/40 toe dolly, thicker and about 50 percent heavier....

Picard 252/41 1/2 Fender Utility Dolly The Picard 252/41 1/2 is a compact utility dolly for fender work, 80 mm long, with crowned working faces of ...

Picard 252/44 Hatchet Dolly The Picard 252/44 is a hatchet pattern dolly, 192 mm long, with a long blade style working edge. It weighs 1600 g (3.53...

Picard 252/47 Bumping Hammer with Rubber Cap The Picard 252/47 is a bumping hammer with a 33 mm steel face at one end and a changeable 55 mm rubber...

Picard 252/47 Replacement Rubber Cap - 55 mm This is the replacement 55 mm rubber cap for the Picard 252/47 bumping hammer. The cap is the wearing ...

Picard 252/48 K Planishing Hammer - Checked Face The Picard 252/48 K is a large face planishing hammer with a 46 mm checked round face and a 40 mm ...

Picard 252/48 Planishing Hammer - Smooth Faces The Picard 252/48 is a large face planishing hammer with a 46 mm smooth round face and a 40 mm smoot...

Picard 252/51 Cross Pein Finishing Hammer - Curved Pein The Picard 252/51 is a light finishing hammer with a large, thin round face and a curved cr...

Picard 252/52 Cross Pein Finishing Hammer - Straight Pein The Picard 252/52 is a light finishing hammer with an extra wide, thin round face and a s...

Picard 252/54 1/2 Single Face Planishing Hammer - Arched Face The Picard 252/54 1/2 is a single face planishing hammer with a 47 x 29 mm face that ...

Picard 252/54 Single Face Planishing Hammer - Flat Face The Picard 252/54 is a single face planishing hammer with a flat, smooth 47 x 29 mm rectang...

Picard 252/55 Special Pattern Dolly / Anvil Block The Picard 252/55 is a special pattern dolly, 102 x 55 mm, with a curved hook profile. It weighs ...

Picard 252/58 Curved Fender Dolly The Picard 252/58 is a curved fender dolly, 110 x 62 mm, shaped to work the inside of wheel arch lips and rolled ...

Picard 252/59 Low Profile Fender Dolly The Picard 252/59 is a thin, low profile dolly, 105 x 68 mm and only 19 mm high, made for fender work. It we...

Move Metal With Ease with the 2.2lb Picard No. 174 Embossing Hammer With it's alloyed PICARD special - steel which has been hardened, tempered, gro...

Picard No. 249 Body Hammer and Dolly Set - 7 Piece The Picard No. 249 is Picard's starter body kit: three hammers, a soft face hammer and three dol...

Picard No. 254 Body Tool Set - 27 Piece The Picard No. 254 is a 27 piece body tool set in sheet steel cases, covering hammers, dollies, spoons, a p...

Picard No. 259 Body Hammer, Dolly and Spoon Set - 12 Piece The Picard No. 259 is a 12 piece body repair set in a sheet steel case: four hammers, fo...

Picard No. 260 Body Tool Set - 23 Piece The Picard No. 260 is a 23 piece professional body tool set in sheet steel cases: hammers, dollies, spoons,...