Skip to content
Shrink It, Stretch It, Shape It, Own It
Shrink It, Stretch It, Shape It, Own It
All Products Brands Contact Blog
Baileigh R-H85 Hydraulic Roll Bender
Baileigh R-H85 Hydraulic Roll Bender - Rolls Front View
Baileigh R-H85 Hydraulic Roll Bender - Guide Roll
Baileigh R-H85 Hydraulic Roll Bender - Guide Roll Close Up
Baileigh R-H85 Hydraulic Roll Bender - Electrical Panel
Baileigh R-H85 Hydraulic Roll Bender - Rolls Side View
Baileigh R-H85 Hydraulic Roll Bender - Control Panel
Baileigh R-H85 Hydraulic Roll Bender
Baileigh R-H85 Hydraulic Roll Bender - Rolls Front View
Baileigh R-H85 Hydraulic Roll Bender - Guide Roll
Baileigh R-H85 Hydraulic Roll Bender - Guide Roll Close Up
Baileigh R-H85 Hydraulic Roll Bender - Electrical Panel
Baileigh R-H85 Hydraulic Roll Bender - Rolls Side View
Baileigh R-H85 Hydraulic Roll Bender - Control Panel

Baileigh R-H85 Hydraulic Roll Bender

SKU: BA9-1006841  by Baileigh
$45,869.00 - $45,869.00
$45,869.00
$45,869.00 - $45,869.00
$45,869.00

Call for our Best Deal (855) 605-4599

Baileigh R-H85 Hydraulic Roll Bender Details

  • Double-pinch, three hydraulically driven rolls - fixed top roll, both bottom rolls hydraulically positioned, so both ends are pre-bent in one setup
  • 3.937" x .118" round tube - to a 118" minimum diameter, on special rolls sold separately
  • 3.5" OD pipe x .157" wall - to a 63" minimum diameter, on special rolls sold separately
  • 4.724" x 1.181" flat bar on edge - on the standard rolls, to a 23.6" minimum diameter
  • 3.149" x .314" angle and C5 x 9 channel - angle to 63" leg in or 78.7" leg out, channel to 47.2"
  • Digital roll position readout - repeat a setting from one part to the next
  • Operator podium with foot pedal - forward and reverse under your foot, variable roll speed 0-4.2 rpm
  • Lateral guide rolls - hold angle and other asymmetric profiles square while they roll
  • 10.5 HP, 220V 3-phase, 28A - 2,900 psi hydraulics, 3.15" shafts, 9.65" lower rolls
  • 3,550 lbs shipping weight - 63" x 62" x 77" shipped; plan for a forklift
Ships via LTL / Truck Freight

Due to the size and weight of this product, this item ships on a Pallet via LTL / Truck Freight.

We provide real-time pricing for LTL freight including the various options listed below - rates can be seen on the checkout page. 

LTL Freight has a number of options, depending on your ability to unload the goods. 

The basic service offers delivery by truck where the receiver must unload the goods themself - usually a loading bay and / or a forklift is required to do this.

Lift Gate (L) means your goods will be delivered in a truck that is equipped with a tailgate loader / lift-gate. In this situation, the driver will move your goods from the truck to the lift-gate and lower the goods to ground level. You are then responsible for moving the goods from the lift-gate.

Inside delivery (I) is where the driver will move the goods from the truck to ground level and then move the into your premises. 

All residential deliveries must include the lift-gate service and delivery is usually made curb-side meaning you are responsible for moving the goods into your premises / workshop / garage. 

If you have any questions about LTL delivery or need to make alternate arrangements, please contact us on (855) 605 4599 and we are happy to assist. 

You can view our Shipping Policy Here 

Product Downloads

Download Baileigh R-H85 Hydraulic Roll Bender Manual

Baileigh R-H85 Hydraulic Roll Bender - Double-Pinch Rolling for Tube, Pipe, Angle and Channel

The Baileigh R-H85 is a three-roll, double-pinch hydraulic roll bender for rolling tube, pipe, flat bar, angle, tee and channel. All three rolls are hydraulically driven: the top roll is fixed and the two bottom rolls are positioned hydraulically and independently. Because either bottom roll can pinch the stock against the top roll, the R-H85 pre-bends the leading end and the trailing end in the same setup, which leaves less straight material to cut off as scrap.

The R-H85 is rated for 3.937" x .118" round tube to a 118" minimum diameter, 3.5" OD pipe in .157" wall to 63", 3.149" x .314" angle to 63" with the leg in, and C5 x 9 channel to 47", all in 60,000 psi mild steel. On the standard rolls it takes flat bar up to 4.724" x 1.181" on edge (23.6" minimum diameter) and 1.771" solid square. Round tube, pipe and solid round run on special rolls matched to the size, sold separately. That covers structural arches, railings and stair work, angle rings for flanges, and large-radius frame work.

The operator podium carries the controls and a foot pedal for forward and reverse, with a digital readout of roll position so a setting can be repeated part to part. Roll speed is variable from 0 to 4.2 rpm. Lateral guide rolls on each side hold angle and other asymmetric profiles square as they roll.

It needs 220V three-phase power for the 10.5 HP motor (28A) and runs a 2,900 psi hydraulic system with a 9.25 gallon reservoir. Shafts are 3.15" with 9.65" lower rolls. It ships at 3,550 lbs and 63" x 62" x 77", so plan for a forklift and a floor rated for the load. Baileigh covers it with a 1-year parts warranty.

For smaller tube and lighter work, see the rest of our Tube Rollers. If you need a tight bend rather than a sweep, Baileigh also makes a full range of rotary draw tube and pipe benders.